Vivotek VS2402 Specifiche Scaricare il pdf (Pagina 9)

- 6 -

Physical Description

Front Panel

Status LED’s

Each time Video Server starts up, it will perform

power-on-self-test, abbreviated as POST, to

examine every hardware module. As soon as the

administrator plugs in the power connector both

LED’s under the power LED will flash one by one

until the diagnosis is done. If the result is good,

both status LED’s will turn off for a while and

then follows the pattern below. If any module

fails, refer to the Appendix A for the error pattern

and follow the trouble-shooting procedures. If the system still cannot operate normally,

please contact your reseller for technical service.

Network Interface Condition LED1 (Heartbeat) LED2 (Status)

before IP installed OFF OFF

after IP installed Blink OFF

Ethernet

during camera control Blink Blink

after POST Blink ON PPP with modem

during camera control Blink Blink

before connected ON ON

after connected Blink ON

PPP with null modem

during camera control Blink Blink

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 95 96

Nessun commento

Vivotek VS2402 Specifiche Pagina 9